MSHA Looks to Tighten Safety Rules for Miners

The job of a miner is one ripe with risks, so much that those tasked with protecting them are looking to make things better.

Haulage machinery in underground coal mines — such as shuttle cars, ram cars and scoops — would have to be equipped with technology that prevents miners from becoming struck, pinned or crushed, as per a proposed rule from the Mine Safety and Health Administration.

On Sept. 2, MSHA published a proposed rule calling for proximity detection systems on underground coal hauling systems used on the mining section. Proximity detection is a technology that uses electronic sensors to detect motion and the distance between a miner and a machine. These systems provide audible and visual warnings, and automatically stop moving machines before miners are injured.

MSHA estimates that, as of June 2015, 155 of the approximately 2,116 underground coal hauling machines and scoops were equipped with proximity detection systems.

Between 1984 and 2014, pinning, crushing and striking accidents killed 42 miners and injured 179 others. In the most recent five-year period (2010-2014), accidents killed nine miners in 41 cases — 23 involved coal hauling machines and 18 involved scoops. In one recent case, on Dec. 16, 2014, a repairman was fatally struck by a ram car at the Highland 9 Mine in Union County, Kentucky. Proximity detection systems may have prevented all of these deaths and injuries.

In January, MSHA published a final rule requiring the installation of proximity detection systems on continuous mining machines used to cut coal in underground mines. Many continuous mining machines are already equipped with this technology.

Proposed Rule Focuses in on Proximity Detection Systems

The proposed rule requires coal mine operators to use proximity detection systems that do the following:

Cause a coal-hauling machine or scoop to stop before contacting a miner
Provide audible and visual warning signals when a miner gets too close to the machine (within the machine’s warning zone)
Provide a visual signal on the machine that indicates the system is functioning properly
Prevent movement of the machine if the system is not functioning properly
Prevent interference with or from other electrical systems
Be installed and maintained by a person trained in the system’s installation and maintenance
The proposed rule includes the following phase-in for compliance:
Eight months after the rule goes into effect, coal-hauling machines and scoops manufactured after the effective date of the rule; and coal-hauling machines and scoops equipped with an existing proximity detection system, which can be modified underground must be in compliance.
Thirty-six months after the rule goes into effect, coal hauling machines and scoops equipped with an existing proximity detection system, which cannot be modified underground or needs to be replaced with a new proximity detection system; and coal hauling machines and scoops manufactured on or before the effective date of the rule and not equipped with a proximity detection system must be in compliance.

Thirty-six months after the rule goes into effect, all coal-hauling machines and scoops would need to be in compliance.

In the proposal, MSHA also requests comments on whether this technology should be required in underground metal and nonmetal mines.

The comment period will close on Dec. 1, 2015, and MSHA will hold public hearings to allow the public to present their views on the proposed rule.

Author Kori Shafer-Stack, Editor, Amaxx Risk Solutions, Inc. is an expert in post-injury response procedures and part of the Amaxx team helping companies reduce their workers compensation costs by 20% to 50%. www.reduceyourworkerscomp.com. Contact: kstack@reduceyourworkerscomp.com.

WORK COMP CALCULATOR: http://www.LowerWC.com/calculator.php

MODIFIED DUTY CALCULATOR: http://www.LowerWC.com/transitional-duty-cost-calculator.php

WC GROUP: http://www.linkedin.com/groups?homeNewMember=&gid=1922050/

SUBSCRIBE: Workers Comp Resource Center Newsletter