The 411 on Functional Capacity Evaluations

 

Tests Performed by Occupational or Physical Therapist
 
A functional capacity evaluation (FCE) is a comprehensive series of test administered by an occupational therapist or a physical therapist who has had specialized training in performing a FCE.  The tests are specifically designed to measure:
 
·         stamina
 
·         dynamic strength
 
·         mobility
 
·         flexibility
 
·         body mechanics
 
·         cardiovascular condition
 
·         balance
 
·         coordination
 
·         dexterity
 
·         ability to tolerate functional activities
 
 
Used to Determine Employee’s Readiness to Return to Work
 
In workers’ compensation claims, a FCE is often utilized to determine the injured employee’s physical readiness to return to work and to measure any physical limitations the employee will have as a result of the work comp injury.  A FCE can also be utilized to determine the injured employee’s physical capabilities for vocational retraining when the injured employee will be permanently unable to return to his/her prior vocation.
 
A FCE can be one of two types, either a job specific FCE or a general purpose FCE. In a job specific FCE, the therapist is provided a detailed job description prior to the testing in order to tailor the FCE to the specific job of the employee.  To have a very accurate FCE, the therapist should visit the jobsite to have a detailed understanding of the functions of the job.  In a general purpose FCE, the testing measures the employee’s strength and tolerance in completing standardized or common work task.
 
 
 
Test Can Last Several Hours to Two Days
 
After a determination of the type of FCE, the appointment date is scheduled for the injured employee.  A FCE can last from several hours to two days, depending on the nature and extent of testing.
 
At the start of the FCE, the therapist will perform a comprehensive interview of the injured employee.  The interview is designed to identify any factors that could impact the employee’s ability to participate in the FCE.  The therapist will want to know if the employee has any issues with asthma, COPD or other lung/breathing problems, high blood pressure, physical limitations besides the work comp injury, and obtain the employee’s own assessment of their physical condition including the employee’s perception of his/her pain level.
 
 
Measure Various Physical Tests
 
In conjunction with the interview, the therapist will complete a clinical assessment of the employee to establish a base line for the FCE.  The therapist will measure the employee’s range of motion, balance, grip strength and coordination to establish the testing plan.
 
In a job specific FCE the therapist will measure the employee’s ability to lift, carry and perform other tasks in comparison to the performance levels identified in the employee’s job description guidelines. In the general purpose FCE the therapist will measure the employee’s maximum ability to lift, carry and perform routine work related task.
 
 
5 Categories of Physical Demands
 
The U.S. Department of Labor characterizes jobs in 5 categories depending on the physical demands of the job.  For instance, an over-the-road, or long-haul truck driver is classified as a “heavy” physical demanding job.  The 5 categories are defined as:
 
·         Sedentary:  exerting up to 10 pounds of force occasionally
 
·         Light:  exerting up to 20 pounds of force occasionally or up to 10 pounds of force frequently
 
·         Medium:  exerting 20 to 50 pounds of force occasionally or 10 to 25 pounds of force frequently
 
·         Heavy:  exerting 50 to 100 pounds of force occasionally or 25 to 50 pounds of force frequently
 
·         Very Heavy:  exerting in excess of 100 pounds of force occasionally or in excess of 50 pounds of force frequently or in excess of 20 pounds of force constantly
 
If the therapist is performing a general purpose FCE on a truck driver, the therapist would determine the truck driver’s job is a “heavy” physically demanding job. The general purpose FCE testing would measure the employee’s ability to meet the requirements of the “heavy” job classification.  However, some truck drivers are “drive and drop” drivers where they never touch the cargo.  The hardest part of their job is cranking the landing gear of the trailer up and down and disconnecting the fifth-wheel.  Their job requirements would fall in the “medium” job classification for physically demanding.  Therefore, when there can be different levels of physical effort needed for a job title, it is to both the employer’s and the employee’s benefit to provide a detailed job description to the therapist and to request a job specific FCE.
 
 
Biggest Issue is Validity of Effort by Injured Employee
 
The biggest issue with FCE is the validity of the effort put forth by the injured employee.  If the injured employee has been advised by his/her attorney that the better they do on the FCE, the lower their permanent partial disability settlement will be, the employee is given a financial incentive to put forth less than their best effort.  If there is any concern the employee may not make a sincere effort in the FCE, the therapist should be advised prior to the FCE.  The therapist can give the employee several different tasks or activities that measure the same physical ability.  If the test results reflect a variation in the employee’s ability within a specific category when measured by two or more different methods, the therapist will be able to identify the employee who is trying to game the testing and include in their post testing report the fact that the effort put forth by the employee was inconsistent.
 
 
Results Compared Against Specific Job Description
 
When the FCE testing is completed, the therapist will compile the employee’s test results.  The test results will be compared against the specific job description requirements or the general physical level classification of a job to see if the employee can return to performing the job. The results of the FCE are then reported to the treating doctor and workers’ compensation adjuster and/or nurse case manager. 
 
 

Author Rebecca Shafer, JD, President of Amaxx Risk Solutions, Inc. is a national expert in the field of workers compensation. She is a writer, speaker, and publisher. Her expertise is working with employers to reduce workers compensation costs, and her clients include airlines, healthcare, printing/publishing, pharmaceuticals, retail, hospitality, and manufacturing. She is the author of the #1 selling book on cost containment, Workers Compensation Management Program: Reduce Costs 20% to 50%. Contact: RShafer@ReduceYourWorkersComp.com.

 

Editor Michael B. Stack, CPA, Director of Operations, Amaxx Risk Solutions, Inc. is an expert in employer communication systems and part of the Amaxx team helping companies reduce their workers compensation costs by 20% to 50%. He is a writer, speaker, and website publisher.  www.reduceyourworkerscomp.com Contact mstack@reduceyourworkerscomp.com

 


WORKERS COMP MANAGEMENT MANUAL:  www.WCManual.com

VIEW SAMPLES PAGES

MODIFIED DUTY CALCULATOR:  www.LowerWC.com/transitional-duty-cost-calculator.php

 

Do not use this information without independent verification. All state laws vary. You should consult with your insurance broker or agent about workers comp issues.

 

©2012 Amaxx Risk Solutions, Inc. All rights reserved under International Copyright Law. If you would like permission to reprint this material, contact us at: Info@ReduceYourWorkersComp.com.

Discussion

  1. why cant I print this page?

Speak Your Mind

*

Professional Development Resource

Learn How to Reduce Workers Comp Costs 20% to 50%"Workers Compensation Management Program: Reduce Costs 20% to 50%"
Lower your workers compensation expense by using the
guidebook from Advisen and the Workers Comp Resource Center.
Perfect for promotional distribution by brokers and agents!
Learn More

Please don't print this Website

Unnecessary printing not only means unnecessary cost of paper and inks, but also avoidable environmental impact on producing and shipping these supplies. Reducing printing can make a small but a significant impact.

Instead use the PDF download option, provided on the page you tried to print.

Powered by "Unprintable Blog" for Wordpress - www.greencp.de